Toilet Fill Valve Parts Built - In Safety Filter Cone Shaped For
Built-in safety filter G0402 works as an internal filter to screen
out the dirt coming from the water supply line. It's in a cone
shape to improve the speed of filtration. It's designed for toilet
fill valve G1/2" and any other pipe inlet at size of G1/2". The
meshes of this filter is as fine as 0.5mm, small enough to prevent
majority of impurities from entering into the toilet cistern
through the fill valve.
|Color:||Black or orange|
|Overall size:||14mm*24mm (Dia./H)|
|Application:||Internal filter for toilet fill valve|
- Easy to install, tool free.
- Injection molded from strong polyoxymethylene raw material.
- Cone shape design for quick filtrating.
- Protect toilet fill valve from blocking by dirt.
- Fine meshes to screen out impurities in small size.
- Suitable for toilet fill valve with inlet shank G1/2".
You can have a preferred color for certain parts of fill valve,
flush valve, etc. But please note there’s a different MOQ required
and it may involve some extra cost.
Generally speaking, the color of the product main body is in an
uniform color. For example, we choose one tone of white color after
many times of experiments. This kind of white is sensitive to
recycled material, i.e., there will be noticeable marks on the
products even observed with naked eyes. Not every factory dare to
use this kind of color. For this reason, we recommend you keep the
color of the main body and only choose different color for other
If you want to have your own logo on the product, you can choose
from laser etching, silk printing, adhesive label or mold carving.
Push button and tank lever are the parts exposed to end user. It’s
the best place to show your logo or brand name. And the finish of
these parts are chrome plated normally. Therefore, laser etching is
the best match for this kind of silver finish surface. But please
noted, the color of laser etching is always in grey.
If you’re selling the products to DIY markets and need to display
the products on shelves, you may need to have the logo printed on
the fill valve and / or flush valve, not only on the button or
lever. You can consider to use silk printing, especially when you
want to use vivid colors.
If you have higher requirements on the logo pattern and color
combination, it’s better to choose the label. It’s 4 C color
printed adhesive label in any pattern and size you need. Its
disadvantage is also easy to see, it could not be long lasting.
The last frequently used way is mold carving. This is a permanent
way to carry your logo on the product. But the MOQ will be higher
than any other ways as it need to make some revision on the
existing molds. Please remember not every position of the product
could be carved with your logo. Only some positions is applicable.
Please check with our sales team and get further help.
Founded in 2007, Xiamen Xinnin Sanitaryware Technology Co., LTD is
devoted to providing best sanitary fittings and related solutions
to our valued customers. After 10 years of hard working and
continues improvement, Xinnin has become one of leading
manufacturers in the industry. We have the best raw material
source, high-tech mold design, automatic production facilities and
in-house inspection equipments. What’s more important, we have an
experienced and ambitious team of R&D, QC and management.