Long Endurance Toilet Dual Flush Valve With Customized Overflow
This canister type dual flush valve is designed for ceramic toilet
factories and professional plumbers. With different heights
available, you can always find a right model for your toilet. Based
on duo flush structure, it can save 40% of water at least compared
to that of flapper flush valve. It's the most economic solution for
a dual flush toilet. Meanwhile our dual flush valve has a very soft
hand feeling and requires small force to actuate it. Please note,
this dual flush valve needs a top mounted dual push button to
actuate flush. For fill valve, it's recommended to choose some
compact designs as it may not compatible with some big float
valves. For more question, please contact our sales team.
|Material:||ABS, POM, rubber, silicone.|
|Net weight:||340g +/- 3%|
|Installation height:||200mm (from the upper rim of gasket to the top)|
|Toilet cistern height:||240mm - 320mm|
|Outlet size:||2" for 1-pc toilet|
|Flushing rate:||>=2.3 Liters per seconds|
|Overflow pipe:||Fixed height customized per requirements|
|Flush volume:||partical flush and full flush, both adjustable|
|Residual water level:||4.5 cm for full flush, 6cm for partial flush|
|Body rotation:||360 degree|
|Seal washer:||NBR rubber, flat|
|Endurance:||100,000 times of partial flush and 100,000 times of full flush|
|Push button installation:||Top mounted|
Manual operated dual action flush valve.
Heavy duty design.
Made from strong high quality plastic material complied with ROHS.
Easy to install, totally tool free.
Different bow seals compensate for pan irregularity.
Silicone flapper ensure water tightness and leakage free.
Overflow pipe height customized per order.
Soft hand feeling, less than 20N.
Powerful rinsing flow(2.3L/s).
Suitable for plastic and ceramic toilet cisterns.
Long endurance, 5 years warranty.
Easy access for maintenance.
If you want to have your own logo on the product, you can choose
from laser etching, silk printing, adhesive label or mold carving.
Push button and tank lever are the parts exposed to end user. It’s
the best place to show your logo or brand name. And the finish of
these parts are chrome plated normally. Therefore, laser etching is
the best match for this kind of silver finish surface. But please
noted, the color of laser etching is always in grey.
If you’re selling the products to DIY markets and need to display
the products on shelves, you may need to have the logo printed on
the fill valve and / or flush valve, not only on the button or
lever. You can consider to use silk printing, especially when you
want to use vivid colors.
If you have higher requirements on the logo pattern and color
combination, it’s better to choose the label. It’s 4 C color
printed adhesive label in any pattern and size you need. Its
disadvantage is also easy to see, it could not be long lasting.
The last frequently used way is mold carving. This is a permanent
way to carry your logo on the product. But the MOQ will be higher
than any other ways as it need to make some revision on the
existing molds. Please remember not every position of the product
could be carved with your logo. Only some positions is applicable.
Please check with our sales team and get further help.